If your Dyson has no suction suddenly, start with the filter, because a clogged filter alone can cut suction by 30 to 50 percent. The other usual causes are a bin filled past MAX, a blockage in the wand, hose or cleaner head, or hair wrapped around the brush bar. Work through the steps below in order, and check the suction after each one.
If the bin is empty, the filter is washed and fully dry, and the airway is clear, but suction is still low, check the seals around the bin and filter for a poor fit. If the seals are fine, the motor or cyclone may need service, so contact Dyson support.
My Dyson has no suction suddenly, what do I check first? Check the filter first. A clogged filter alone can cut suction by 30 to 50 percent. Wash it in cold water, air-dry it for 24 hours, and never refit it wet. Then empty the bin below MAX and check the wand, hose and cleaner head for blockages.
How long do I dry the filter after washing it? Let it air-dry for 24 hours before you refit it. Never use a wet filter, and never dry it with heat, because a damp filter restricts airflow just like a clogged one.
Why did the suction drop even though the bin is empty? The bin is only one cause. A clogged filter can cut suction by 30 to 50 percent on its own, and a blockage in the wand, hose or cleaner head, or hair wrapped around the brush bar, will do the same. Work through the filter and airway steps even when the bin is empty.
Dyson Vacuum Pulsing and Cutting Out · Dyson Vacuum Flashing Lights Meaning · Dyson Vacuum Wont Charge · Dyson Brush Bar Not Spinning