Dyson Vacuum Flashing Lights Meaning, What Each Colour Means

If your Dyson is flashing red and will not turn on, do not assume it is dead. A flashing light is the machine telling you what is wrong, and the colour is the clue. Flashing blue usually means the battery has no power, amber means a temperature problem, and flashing red usually means a fault. Read the colour first, then work through the matching step below.

The fixes, in order

  1. Note the colour, and whether it is flashing or solid. The same light means different things on different models, so write down the colour and whether it flashes before you do anything else.
  2. Flashing blue: charge it. Flashing blue means the battery has no power. Put the machine on the charger for 3.5 hours. A solid blue light while charging means it is charging normally, and the light goes out when it is full.
  3. Amber: fix the temperature. An amber light, flashing or solid, means the machine is outside its normal temperature range, or has a temperature fault while charging. Bring it back to between 3 degrees C (37 degrees F) and 40 degrees C (104 degrees F) before you use or charge it.
  4. Flashing red: cool it, clear it, then check again. Flashing red usually means a fault, most often the battery on cordless models. Switch it off, let it cool, clear any blockage, check the filter is fitted and dry, then try charging again.
  5. If the red light keeps flashing, contact Dyson. If the fault light stays on after cooling, clearing blockages and charging, the battery may need replacing. Contact Dyson support and tell them the colour and the model.
Light meanings vary by model, so do not trust a flash count chart. On the original V8, one flashing red light means a battery fault, while red and blue alternating means a charger fault. On the V8 Cyclone and V10, a flashing blue battery light can mean a battery fault. V12, V15 and V16 models with an LCD screen show named on-screen alerts for battery, blockage and filter problems instead. Third-party flash-count charts report patterns people have seen, they are not official Dyson codes, so use the colour and your manual, not a count.

If nothing works

If no light comes on at all, try a different outlet and check the charger contacts for dust, as in the charging guide. If a light stays on after cooling, clearing and a full 3.5 hour charge, the battery or charger is the likely cause, and Dyson support can confirm which one.

Common questions

My Dyson is flashing red and will not turn on, what do I do? First, switch it off and let it cool. Clear any blockage, check the filter is fitted and dry, then put it on the charger. Flashing red usually means a fault, most often the battery on cordless models. If the red light keeps flashing after that, contact Dyson, because the battery may need replacing.

Dyson blinking red light, is it dead? Not necessarily. A flashing red light usually means a fault, most often the battery, and it can also follow a blockage or overheating. Let it cool, clear any blockage, check the filter and try charging again before you assume the machine is dead.

My Dyson is flashing blue and will not charge, what does that mean? Flashing blue usually means the battery has no power, so charge it for 3.5 hours. A solid blue light while charging means it is charging normally. One exception: on the V8 Cyclone and V10, a flashing blue battery light can mean a battery fault, so if it never takes a charge after a full charge, the battery or charger may need replacing.

Related guides

Dyson Vacuum Pulsing and Cutting Out · Dyson Vacuum Lost Suction · Dyson Vacuum Wont Charge · Dyson Brush Bar Not Spinning

Was this helpful?