Dyson Brush Bar Not Spinning, How to Fix It

If your Dyson brush bar is not spinning, help is usually a pair of scissors away. Hair and thread wrapped around the bar is the most common cause, and it can stop the bar completely or trigger the safety lockout on newer models. Switch the machine off first, then work through the steps below.

The fixes, in order

  1. Switch it off and remove the brush bar. Switch the machine off and take the brush bar out of the cleaner head, following the manual for your model.
  2. Cut the hair and thread away. Cut away hair and thread wrapped around the bar, and clear any string from the ends. This is the most common cause of a bar that will not spin.
  3. Check the end cap turns freely. Spin the end cap by hand. If it is stiff or stuck, clean it out until it turns freely, then refit the bar.
  4. Clean the contacts where the head meets the wand. Wipe dust from the contacts on the cleaner head and the wand, and make sure the head clicks firmly into place. A poor connection can stop the bar.
  5. Clear the safety lockout, if your model has one. On V11, V12 and V15 models, the machine stops the brush bar when it meets excessive resistance. Switch it off, clear the wrap, then switch it back on and try again.

If nothing works

If the bar is clean, the end cap turns freely, the contacts are clean and the head clicks in, but the bar still will not spin, the floor-head motor has likely failed. That is a service job or a replacement cleaner head, so contact Dyson support.

Common questions

My Dyson brush bar is not spinning, help, what do I do first? Switch it off, take the brush bar out, and cut away the hair and thread wrapped around it. That is the most common cause. Then check the end cap turns freely and clean the contacts where the head meets the wand.

Why does the brush bar keep stopping on my V11, V12 or V15? Those models stop the brush bar when they meet excessive resistance, as a safety lockout. Switch the machine off, clear the hair and thread from the bar, then switch it back on and try again.

The brush bar is clean but still will not spin, what now? Check the contacts where the head meets the wand are clean and the head clicks firmly into place. If it still will not spin, the floor-head motor has likely failed, and that is a service job or a replacement cleaner head.

Related guides

Dyson Vacuum Pulsing and Cutting Out · Dyson Vacuum Flashing Lights Meaning · Dyson Vacuum Lost Suction · Dyson Vacuum Wont Charge

Was this helpful?