No internet, secured, explained and fixed

Windows shows “No internet, secured” when the device has joined the Wi-Fi network with the right password, but cannot reach the internet. The word secured only means the Wi-Fi encryption is working. The break is further along: the router, the IP address, or DNS.

The fix, in order

  1. Restart the modem and router. Unplug both for 30 seconds, plug the modem back in first, wait for its lights to settle, then plug the router back in. This is the most common fix.
  2. Check other devices. If every device shows the same status, the internet service or the router is down, not your device.
  3. Forget the network and reconnect. In Settings, Network and internet, Wi-Fi, Manage known networks, choose Forget, then reconnect with the password.
  4. Release and renew the IP address. Open Command Prompt as administrator and run ipconfig /release then ipconfig /renew, followed by ipconfig /flushdns.
  5. Reset the network stack. In the same admin Command Prompt, run netsh winsock reset and netsh int ip reset, then restart.
  6. Try a different DNS server. In the adapter's IPv4 properties, set the DNS servers to 8.8.8.8 and 8.8.4.4 and test again. If names still do not resolve, check them with the DNS lookup tool.
If the router's internet light stays off or red after a restart, do not keep resetting settings on the PC. The service itself is down, and only the provider can fix it.

If it still happens

If the message appears on this device only, run a Network reset (Settings, Network and internet, Advanced network settings, Network reset) and update the Wi-Fi driver from the computer maker's site. If it appears on all devices and the router restart did not help, check for an outage with the provider.

Common questions

What does “No internet, secured” mean? It means the Wi-Fi connection itself is working and encrypted, but the device cannot reach the internet. The cause is usually the router, the IP address assignment, or DNS.

Is “No internet, secured” the same as “Connected, no internet”? Yes, in practice. Both describe a working Wi-Fi link with no internet beyond it. Windows 10 and 11 phrase it slightly differently depending on the version and the network panel.

Related errors

Wi-Fi connected but no internet · Wi-Fi doesn't have a valid IP configuration · DNS server not responding

Was this helpful?