The RoamWiFi R10 is a pocket hotspot that works two ways: with no SIM card, using its built-in cloud connection, or with a SIM card you insert yourself. The Wi-Fi name and password show on the device screen, so you never have to guess them. When it stops working, the cause is usually an empty data plan, a SIM that is not seated right, or the wrong APN in SIM mode. That is the "my RoamWifi won't connect and I need internet right now" problem.
The fix, in order
Check the data plan. In cloud mode, check the plan balance. If the plan is used up or expired, the hotspot cannot connect until you add data.
Look at the screen. Short press the power button to wake the screen and check the Wi-Fi name, password, and signal. If the screen shows no signal, move to a place with better coverage.
Restart the hotspot. Long press the power button for 3 seconds to power it off, wait a few seconds, then long press again for 3 seconds to power it on.
Reset it if it will not turn off. Long press the power button for 15 seconds to reset and restart the device. Use this when the device will not turn off or stops responding.
If you use a SIM card, check it. Power the device off first, then remove and reinsert the SIM card, making sure it sits flat in the slot. Power the device back on.
Check the APN in SIM mode. Connect a phone or laptop to the RoamWiFi network, open a browser, and go to http://192.168.1.1/apn_set.htm to check the APN setting. If it is wrong for your carrier, the hotspot will connect to Wi-Fi but have no internet.
Try the other mode. If cloud mode is not working and you have a SIM card, switch to SIM mode, or the other way around. The two modes use different networks, so one may work where the other does not.
The 15-second reset is the fix for a RoamWiFi that will not turn off or respond. Do not keep tapping the power button, hold it for the full 15 seconds and let the device restart on its own.
If it still happens
If the screen shows a signal but no device can get internet in either mode, the problem may be the data plan or the network in your area. Check the plan balance, try a different location, and contact RoamWiFi customer service if it still fails.
Common questions
Why does my RoamWiFi show a signal but I have no internet? "My RoamWifi has full bars but nothing loads" is the usual wording. A signal bar means the hotspot can see a cellular network, not that it has data. Check the data plan first, then check the APN setting at 192.168.1.1/apn_set.htm if you use a SIM card.
How do I reset my RoamWiFi? Long press the power button for 15 seconds. The device resets and restarts. Use this when the device will not turn off or stops responding.