TP-Link Roam 6 travel router not working, explained and fixed
The TP-Link Roam 6, model TL-WR1502X, is a travel router, not a cellular hotspot. It has no SIM slot and no cellular radio, so it cannot create internet on its own. It shares a connection that already exists, from an Ethernet cable, a hotel Wi-Fi network, or a phone tethered over USB. When it shows no internet, the problem is almost always the source connection, the wrong mode, or a captive portal that was never completed. That is the "my Roam 6 says no internet and I'm at a hotel" problem.
The fix, in order
Check the LED. A solid blue light means a stable connection. A red light means the router has no internet. If the light is red, the problem is upstream, not in the router.
Check the source connection first. In Router mode, the Ethernet cable must come from a modem or connection that is actually online. Plug a laptop directly into the same cable or modem to confirm the internet works without the Roam 6.
Confirm the operation mode. The Roam 6 has several modes, and the wrong one stops everything. Use Router mode for an Ethernet connection, Range Extender mode to repeat a Wi-Fi network, AP mode to turn a wired connection into Wi-Fi, and USB Tethering mode to share a phone's connection. Pick the mode that matches how you are getting online.
Complete the captive portal. On hotel, airport, and cafe Wi-Fi, you must open a browser and accept the terms or log in before the internet works. If you skipped that step, the Roam 6 will show as connected with no internet.
Check the mode settings in the web page. Open a browser on a device connected to the Roam 6 and go to tplinkwifi.net or 192.168.0.1. In 3G/4G Modem mode, check Internet, then Connection Settings, and make sure the dial number, APN, username, and password are set for your modem.
Fix a dropping connection. The wireless channel is set to Auto by default, and Auto can cause frequent drops. Set the wireless channel to a fixed channel to stop it changing.
Reset the router. With the router powered on, press and hold the Reset button for about 6 seconds, then release it. Set the router up again in the correct mode.
The Roam 6 has no SIM card slot and no cellular radio. It cannot make internet where there is none. If the hotel Wi-Fi, the Ethernet cable, or the phone tether has no internet, the Roam 6 will not either.
If it still happens
If the source connection works on its own but the Roam 6 still shows no internet, try both the LAN and WAN ports, and check that no access control or MAC filtering on the main router is blocking the Roam 6.
Common questions
Why does my Roam 6 connect to Wi-Fi but have no internet? "My Roam 6 is connected but nothing loads" is the usual wording. The Roam 6 shares a connection, it does not create one. Check the source first, then check whether the hotel or cafe Wi-Fi needs a captive portal login in a browser.
How do I reset my Roam 6? With the router powered on, press and hold the Reset button for about 6 seconds, then release it. The default Wi-Fi password is printed on the label on the router.