NETGEAR Nighthawk M6 hotspot not working, explained and fixed
The NETGEAR Nighthawk M6, models MR6150 and MR6220, and the M6 Pro, models MR6500 and MR6550, is a 5G mobile hotspot with a touchscreen that shows the Wi-Fi name, password, and data usage. It takes an unlocked nano-SIM card and works with AT&T, Verizon, T-Mobile, and most other carriers. When it stops working, the cause is usually the SIM, the APN setting, or the Wi-Fi band. That is the "my Nighthawk M6 has no internet and I need it for work" problem.
The fix, in order
Let it initialise. After powering on, give the M6 one to two minutes to start up and find the network. Check the display for the signal and network status before changing anything.
Check the SIM. Make sure the nano-SIM card is active with data services enabled and seated properly. If you swapped SIMs, confirm the new SIM is activated on its plan.
Check the APN. Connect a computer or device to the M6 Wi-Fi, open a browser, and go to http://192.168.1.1. Select Settings, then Advanced Settings, then Cellular, and check the APN. If the APN is wrong for your carrier, the M6 will not get online. Select the right APN or add a new one for your carrier.
Restart the M6. Hold the power button for 5 seconds to bring up the power menu, then restart the device. Also restart the computer or device you are connecting.
Wake the screen and check the band. If the M6 Wi-Fi network does not appear, press the power button to wake the screen, since the Wi-Fi radio may be asleep. Then check whether you are on the right band, since some devices only work on 2.4 GHz or 5 GHz.
Use In-Home Performance mode for better coverage at home. Plug the M6 into AC power and remove the battery to boost Wi-Fi coverage up to 2,000 square feet. On battery power alone, the coverage is reduced to save battery.
Try the Ethernet port. Plug a laptop or router into the 1 Gbps Ethernet port, or 2.5 Gbps on the M6 Pro. If the internet works over Ethernet but not Wi-Fi, the problem is the Wi-Fi link.
Factory reset as a last step. On the touchscreen, tap Settings, then More, then Factory Reset, then Reset Now. Or remove the battery cover and press the Reset button with a paperclip for up to 10 seconds. A reset wipes the Wi-Fi name, password, and all settings back to the defaults.
A factory reset deletes the Wi-Fi network name, password, and all settings. The default admin password is printed on the product label. Write down your settings before you reset.
If it still happens
If the M6 shows a signal and the APN is correct but it still will not connect to your carrier's network, check for a software update on the device, and check with your carrier whether the SIM and plan are active.
Common questions
Why does my Nighthawk M6 show an APN error? "My M6 says APN error and won't connect" is the usual wording. The APN tells the hotspot how to connect to your carrier's data network. If it is wrong, the M6 cannot get online. Connect to the M6 Wi-Fi, open a browser, go to http://192.168.1.1, then Settings, Advanced Settings, Cellular, and select the APN for your carrier.
How do I factory reset my Nighthawk M6? On the touchscreen, tap Settings, then More, then Factory Reset, then Reset Now. Or remove the battery cover and press the Reset button with a paperclip for up to 10 seconds.