AT&T GoLink 5G hotspot not working, explained and fixed
The AT&T GoLink 5G is a 5G mobile hotspot with a screen that shows the Wi-Fi name, password, and data usage. It connects up to 15 devices and can also share internet over a USB cable. When it stops working, the cause is usually the wrong Wi-Fi band, a forgotten password, or the device needing a restart. That is the "my GoLink hotspot won't connect and I need wifi now" problem.
The fix, in order
Check the Wi-Fi Info screen. The screen shows the Wi-Fi network name, which starts with GoLink-XXXX, and the password. Make sure you are joining that exact network with that exact password.
Switch the band to 2.4 GHz. The GoLink broadcasts 5 GHz by default and does not broadcast 2.4 GHz and 5 GHz at the same time. Some older laptops and devices cannot see a 5 GHz network. Open the Online WebUI Manager at http://hotspot.webui or http://192.168.1.1 and switch the AP band to 2.4 GHz.
Check the data usage screen. If the plan is used up, the hotspot cannot connect. Check the Data Usage screen on the device to see how much data is left.
Restart the hotspot. Power it off, wait a few seconds, and power it back on. Give it a minute to reconnect to the 5G network.
Try USB tethering. Connect your computer to the hotspot with a USB cable. If the internet works over USB but not over Wi-Fi, the problem is the Wi-Fi link, not the cellular connection.
Check the Messages screen. The hotspot receives text messages from AT&T about the service plan, and a message there may explain why the data stopped.
Factory reset as a last step. If you changed the login and forgot it, or the device is stuck, use a narrow object such as a paperclip to press and hold the factory reset hole on the side of the device for five seconds. The device returns to factory defaults, and the Wi-Fi name and password go back to the ones shown on the Wi-Fi Info screen.
A factory reset wipes the Wi-Fi name and password back to the defaults. Write down the name and password from the Wi-Fi Info screen before you reset, or be ready to read them off the screen after the reset.
If it still happens
If the hotspot shows a signal and data is left but no device can get internet over Wi-Fi or USB, check the cellular settings in the WebUI Manager. Make sure mobile data is enabled and 5G standalone is on, and check whether the hotspot is set to select networks automatically.
Common questions
Why can't my laptop see my GoLink hotspot? "My laptop can't even find my GoLink wifi" is the usual wording. The GoLink broadcasts 5 GHz by default, and some older devices cannot see 5 GHz networks. Open the WebUI Manager at http://hotspot.webui and switch the band to 2.4 GHz.
How do I reset my GoLink hotspot? Press and hold the factory reset hole on the side of the device with a paperclip for five seconds. The Wi-Fi name and password return to the defaults shown on the Wi-Fi Info screen.